GCAN-207
Gcan-207 Rs232/485 To Can Converter
The GCAN-207 can realize bidirectional communication between RS232 or RS485 bus and CAN bus. It can make RS232 or RS485 devices connected to CAN bus or connect a host PLC/HMI Display into a CAN Bus network.
GCAN-207 has intergrated isolation module on each interface and DIN rail to install.
Application
1. Reconstruction of the communication bus of the public bicycle system
2. No CAN interface PLC collects CAN bus data
3. CAN communication transformation of RS485 interface sensor
4. Long-distance communication transformation of fire fighting equipment
Specifications
| Connectivity | |
| CAN connector | Open terminal block |
| CAN interface | CAN 2.0A, CAN 2.0B, conform to ISO11898-2 |
| CAN baud rate | 5kbit/s to 1Mbit/s |
| Serial interface | RS232 via DB9 or RS485 via Open terminal block |
| Serial baud rate | 600bps~115200bps |
| Isolation | DC 1500V electrical isolation |
| Maximum frame rate | 400 fps unidirectional |
| Data conversion mode | transparent conversion, transparent conversion with identify, format conversion |
| Physical | |
| Size(LxWxH) | 112 x 70 x 25 mm |
| Weight | approx.100g |
| Operating temperature | -40°C~85°C |
| Humidity | 15 to 95% non-condensing |
| Installation | DIN rail |
| Power supply | |
| Power Supply | 9~30V DC |
| Current | 20mA, 24V DC |
Functions
1. Transparent conversion
The GCAN-207 will convert the data to the other side immediately if GCAN-207 receives data without adding data or make changes to the data.
2. Transparent conversion with identify
Transparent conversion with identity will convert the data of Serial frame by adding an address into the CAN frame ID . The start position and length of the address can be configured.
3. Format conversion
The data format is defined in 13 bytes (both serial data and CAN data), which include all information about CAN frame.
